MX-6, Kryonaut, PTM7950 or liquid metal: which is right for your laptop?
There is no single best thermal compound for every laptop. The right choice depends on the chip, the cooler and how long you want the result to last. Here are the four materials we use and how we decide between them.
Arctic MX-6
A well-regarded paste that does not conduct electricity, spreads easily and is forgiving to apply. It is a safe default for most laptops and a good fit when the budget matters. Like any paste, it will eventually dry out and need replacing.
Thermal Grizzly Kryonaut
A high-performance paste aimed at enthusiasts. It is electrically non-conductive, so a small slip is not a disaster. It tends to give a few degrees better results than basic pastes on demanding machines, but like other pastes it can pump out over many heat cycles.
Honeywell PTM7950
A phase-change pad rather than a paste. It is a solid sheet at room temperature and softens at operating temperature, so it fills the gap between chip and cooler. Its main advantage is durability: it resists the pump-out that makes ordinary paste fail on hot laptop CPUs and GPUs. It is pre-cut, so it must suit the chip size and the cooler design.
Liquid metal
A metal alloy that conducts heat better than any paste. It also conducts electricity, so the tiny components around the chip must be protected, and it can damage some metals, notably aluminium. Used correctly on a suitable model it gives the lowest temperatures. Used carelessly it can kill a motherboard. We use it only where the layout is safe for it.
Comparison
| Material | Strength | Watch out for |
|---|---|---|
| Arctic MX-6 | Safe, easy, good value | Dries out over time |
| Kryonaut | Strong performance, non-conductive | Can pump out over time |
| PTM7950 | Long-lasting, stable | Needs the right pad size for the chip |
| Liquid metal | Lowest temperatures | Conducts electricity, harms aluminium |
What matters more than the brand
The difference between good materials is often a few degrees. A clean cooler, correct mounting pressure and the right amount of compound make a bigger difference than the name on the tube. That is why a full service beats a quick paste swap.
How we choose for your model
We look at the chip and cooler design, the surrounding components, and how you use the laptop. Then we tell you which material we recommend and why. Cooling Start and Plus use proven pastes, and Cooling Premium uses top paste or liquid metal where the model allows it. You can see the levels on the prices section.
Quick answers
Is liquid metal safe for laptops?
Only on suitable models. It conducts electricity and can harm aluminium, so surrounding components must be protected.
Which thermal paste is best for a gaming laptop?
It depends on the chip and cooler. Arctic MX-6 is a safe default, Kryonaut gives strong performance, and PTM7950 is the most durable.
Do I need to buy the paste myself?
No. We choose the material for your model and confirm it with you before anything is bought.